FRP ክፍል አሞሌ
Pultruded Profile is a composite material with unique characteristics making it useful in a wide variety of applications. Most rods are composed of polyester resin and fiberglass. These composites can be formed into practically any shape by using the pultrusion process.
- ዝርዝሮች
- ጥቅሞች
- ማሸግ እና መላኪያ
- ጥያቄ
ዝርዝር:
Notice: unit: mm (the other colour can be produced as the requirement)
1 FRP I beam size:
200 * 100 * 10 |
50 * 25 * 15 * 4 |
150 * 150 * 7.2 |
38 * 15 * 4 |
150 * 100 * 6.5 |
33 * 20 * 4 |
110 * 50 * 6 |
30 * 20 * 10 * 4 |
70 * 30 * 4 |
25 * 40 * 4 |
65 * 25 * 3 |
25 * 15 * 4 |
58 * 15 * 4.5 |
|
2 FRP U channel size:
200 * 100 * 9 |
80 * 40 * 4 |
180 * 50 * 8 |
80 * 42 * 5 |
160 * 70 * 9 |
140 * 60 * 3 |
150 * 60 * 8 |
70 * 30 * 4.5 |
100 * 50 * 6 |
60 * 50 * 5 |
88 * 30 * 5 |
|
3 FRP Square pipe:
150 * 150 * 4 |
50 * 50 * 4 |
120 * 120 * 5 |
50 * 50 * 5 |
100 * 100 * 5 |
40 * 40 * 4 |
100 * 100 * 2.7 |
40 * 40 * 2.7 |
80 * 80 * 3.5 |
40 * 40 * 3.5 |
70 * 70 * 4 |
30 * 30 * 3.1 |
60 * 60 * 5 |
25 * 25 * 5 |
4 FRP rectangle tube:
180 * 60 * 4 |
63.5 * 37 * 3.5 |
160 * 604 |
60 * 30 * 3 |
140 * 60 * 3 |
60 * 30 * 2.7 |
120 * 3.5 * 60 * 3 |
60 * 35 * 3 |
100 * 50 * 5 |
86 * 32 * 3 |
90 * 4 * 40 * 5 |
48 * 32 * 3 |
90 * 4 * 40 * 7 |
48 * 28 * 3 |
75 * 3 * 35 * 6 |
|
5 FRP round pipe:
Φ80 * 70 * 5 |
φ46 * 42 * 2 |
φ31 * 25 * 3 |
φ65 * 57 * 4 |
φ40 * 32 * 4 |
φ21.5 * 16.5 * 2.5 |
φ60 * 50 * 5 |
φ55 * 45 * 4.5 |
φ25 * 20 * 2.5 |
φ50 * 40 * 5 |
φ38 * 31.8 * 3.1 |
φ19 * 12.5 * 3.25 |
φ50 * 42 * 4 |
φ52 |
φ31 * 5 |
φ48 * 38 * 5 |
φ32 * 28 * 2 |
|
6 FRP pipeline 0.6Mpa:
DN50 ሚሜ |
DN500 ሚሜ |
DN65 ሚሜ |
DN600 ሚሜ |
DN80 ሚሜ |
DN700 ሚሜ |
DN100 ሚሜ |
DN800 ሚሜ |
DN125 ሚሜ |
DN900 ሚሜ |
DN150 ሚሜ |
DN1000 ሚሜ |
DN200 ሚሜ |
DN1200 ሚሜ |
DN250 ሚሜ |
DN1400 ሚሜ |
DN300 ሚሜ |
DN1500 ሚሜ |
DN350 ሚሜ |
DN1600 ሚሜ |
DN400 ሚሜ |
DN1800 ሚሜ |
DN450 ሚሜ |
DN2000 ሚሜ |
7 FRP round bar:
φ8 |
φ10 |
φ12 |
φ14 |
φ16 |
φ20 |
φ25 |
φ50 |
8 FRP angle bar:
50 * 50 * 5 |
40 * 40 * 4 |
30 * 30 * 3 |
ዝርዝሮች:
During the pultrusion process,the raw material are pulled through a heated steel forming die using a continuous pulling device. when the reinforcements are saturated with the resin mixture in the resin bath and the wetted reinforcement package is wrapped in a surfacing veil. the completed package then goes into a performer that roughly forms the package into the appropriate shape to enter the heated die for curing. the die is the exact shape of the final part desired. upon exiting the die, the part is over 90% cured and solid. the length of the part required is pulled through the cutoff saw and the process is complete.